Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ISO62 | 0.10 % |
| density | | ISO1183 | 1.35 g/cm³ |
| Shrinkage rate | | ISO2577 | 0.40到0.60 % |
| Water absorption rate | | ISO62 | 0.30 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | ISO1210 | V-0 |
| Burning wire flammability index | | IEC60695-2-12 | 750 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | Yield | ISO527-2 | <55.0 MPa |
| Tensile strain | Break | ISO527-2 | 10 % |
| Flexural modulus | | ISO178 | 2800 MPa |
| Bending stress | | ISO178 | 90.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO180/1A | 6.0 kJ/m² |
| | ISO180/1U | 34 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ASTMD257 | 10到1.0E+5 ohms |
| EMIShieldingEffectivity | | ASTMD4935 | 50.0到65.0 dB |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO11359-2 | 6E-05 cm/cm/°C |
| RTI Imp | | UL746 | 85.0 °C |
| | ISO75-2/A | 90.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare