ABS AF312A NP CNOOC&LG HUIZHOU

Form：Granules

Properties:

High impact resistanceHigh mobilityFlame retardant

Typical Applications:

OA deviceElectrical enclosureElectrical/Electronic Applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	OA device \| Electrical enclosure \| Electrical/Electronic Applications
Properties:	High impact resistance \| High mobility \| Flame retardant

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23°C,6.40mm	ASTM D256	210	J/m
	Impact strength of cantilever beam gap	23°C,3.20mm	ASTM D256	250	J/m
		Impact strength of cantilever beam gap	-30°C,6.40mm	ASTM D256	69	J/m
		Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-30°C,3.20mm	ASTM D256	69	J/m
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	3.0mm	UL 94	V-0
	UL flame retardant rating	1.5mm	UL 94	V-0
		UL flame retardant rating	2.0mm	UL 94	V-0
			UL flame retardant rating	2.5mm	UL 94	V-0
			UL flame retardant rating	UL flame retardant rating	1.0mm	UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength	6.40mm	ASTM D790	68.6	Mpa
Bending modulus	6.40mm	ASTM D790	2550	Mpa
elongation	Break,3.20mm	ASTM D638	>20	%
elongation	elongation	Yield,3.20mm	ASTM D638	5.0	%
Tensile modulus	3.20mm	ASTM D638	2260	Mpa
tensile strength	Yield,3.20mm	ASTM D638	44.1	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
RTI Elec		UL 746	85.0	°C
RTI Imp		UL 746	75.0	°C
RTI Str		UL 746	75.0	°C
Vicat softening temperature		ASTM D15255	83.0	°C
Hot deformation temperature	1.8MPa,Unannealed,6.40mm	ASTM D648	76.0	°C
Hot deformation temperature	Hot deformation temperature	0.45MPa,Unannealed,6.40mm	ASTM D648	84.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	MD：3.20mm	ASTM D955	0.40-0.70	%
melt mass-flow rate	220°C/10.0kg	ASTM D1238	60	g/10min
density		ASTM D792	1.19	g/cm³
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ASTM D785	105

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top