
PC D351-7A4D037 SABIC INNOVATIVE NANSHA
37
Form:Granules | Grade:Injection grade
Properties:
Glass fiber reinforcedHalogen-free flame retard
Typical Applications:
Electronic and Electrical ApplicationsPlastic bag
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electronic and Electrical Applications | Plastic bag |
| Properties: | Glass fiber reinforced | Halogen-free flame retard |
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ASTM D256 | 510 | J/m |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 150 | J/m |
| Bending modulus | 23°C | ASTM D790 | 8400 | Mpa |
| bending strength | 23°C | ASTM D790 | 179 | Mpa |
| Tensile modulus | 23°C | ASTM D638 | 9050 | Mpa |
| Elongation at Break | 23°C | ASTM D638 | 2 | % |
| tensile strength | 23°C | ASTM D638 | 120 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | TD | ASTM D696 | 6.7E-05 | cm/cm/°C |
| MD | ASTM D696 | 2E-05 | cm/cm/°C | |
| Hot deformation temperature | 1.80MPaUnannealed | ASTM D648 | 116 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 300℃/2.16Kg | ASTM D1238 | 25 | g/10min |
| Shrinkage rate | TD | ASTM D995 | 0.3 | % |
| MD | ASTM D995 | 0.1 | % | |
| flame retardant performance | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL -94 | V-0 | 0.8mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.