
Unspecified ReoFlex® 50 Smooth-On, Inc
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| optical performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Refractive index | --3 | 1.486 | ||
| --4 | 1.488 | |||
| elastomer | Test Condition | Test Method | Test Result | Test Unit |
| tear strength | ASTM D624 | 21.0 | kN/m | |
| elongation | Break | ASTM D412 | 440 | % |
| tensile strength | Break | ASTM D412 | 4.00 | MPa |
| 100%Strain | ASTM D412 | 1.05 | MPa | |
| tear strength | ASTM D624 | 17.9 | kN/m | |
| elongation | Break | ASTM D412 | 400 | % |
| tensile strength | Break | ASTM D412 | 4.05 | MPa |
| 100%Strain | ASTM D412 | 1.48 | MPa | |
| tear strength | ASTM D624 | 14.0 | kN/m | |
| elongation | Break | ASTM D412 | 400 | % |
| tensile strength | Break | ASTM D412 | 3.45 | MPa |
| Break,23°C | ASTM D412 | 1.72 | MPa | |
| elongation | Break,23°C | ASTM D412 | 500 | % |
| tear strength | 23°C | ASTM D624 | 4.38 | kN/m |
| thermosetting | Test Condition | Test Method | Test Result | Test Unit |
| Thermosetting mixed viscosity | ASTM D2393 | 2000 | cP | |
| stripping time | 960 | min | ||
| storage stability | 50 | min | ||
| stripping time | 960 | min | ||
| storage stability | 20 | min | ||
| 60 | min | |||
| Thermosetting mixed viscosity | ASTM D2393 | 2000 | cP | |
| stripping time | 960 | min | ||
| Thermosetting components | PartA | 按重量计算的混合比:1.0 | ||
| PartB | 按重量计算的混合比:2.0 | |||
| storage stability | ASTM D2471 | 25 | min | |
| Thermosetting mixed viscosity | ASTM D2393 | 250 | cP | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | MD | ASTM D955 | <0.010 | % |
| Specific volume | 0.990 | cm³/g | ||
| density | ASTM D1475 | 1.01 | g/cm³ | |
| Shrinkage rate | MD | ASTM D955 | <0.10 | % |
| Specific volume | 0.965 | cm³/g | ||
| density | ASTM D1475 | 1.04 | g/cm³ | |
| Shrinkage rate | MD | ASTM D955 | <0.10 | % |
| viscosity | ASTM D2393 | Brushable | ||
| density | ASTM D1475 | 1.04 | g/cm³ | |
| Specific volume | 0.968 | cm³/g | ||
| Shrinkage rate | MD | ASTM D955 | 0.15 | % |
| density | ASTM D1475 | 1.17 | g/cm³ | |
| Specific volume | 0.856 | cm³/g | ||
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Shore hardness | ShoreA | ASTM D2240 | 50 | |
| ShoreA | ASTM D2240 | 50 | ||
| ShoreA | ASTM D2240 | 50 | ||
| ShoreA,23°C | ASTM D2240 | 50 | ||
| Supplementary Information | Test Condition | Test Method | Test Result | Test Unit |
| Mixing Ratio | 1A:1Bbyvolume100A:125Bbyweight | |||
| 1:1byvolume1:1byweight | ||||
| 1:1byvolume1:1byweight | ||||
| CureTime | 16.0 | hr |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.