Thermoset Premi-Glas® 1203-30
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 1.95 g/cm³ | ||
| Shrinkage rate | 0.025 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | Compression Molded | ASTMD638 | 15200 MPa |
| elongation | ASTMD638 | 1.2 % | |
| Flexural modulus | Compression Molded | ASTMD790 | 10300 MPa |
| bending strength | Compression Molded | ASTMD790 | 210 MPa |
| Poisson's ratio | 0.30 | ||
| tensile strength | Compression Molded | ASTMD638 | 100 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | Compression Molded | ASTMD256 | 960 J/m |
| Suspended wall beam without notch impact strength | Compression Molded | ASTMD4812 | 1500 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 2.5E-05 cm/cm/°C | |||
| 3.5E-05 cm/cm/°C | |||
| thermal conductivity | 0.30 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top