Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.44 g/cm³ |
| Water absorption rate | | ISO62 | 6.0 % |
| Water absorption rate | | ISO62 | 1.5 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| burning rate | | FMVSS302 | 0.0 mm/min |
| UL flame retardant rating | | UL94 | HB |
| Burning wire flammability index | | IEC60695-2-12 | 700 °C |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179/1eU | 90 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 95 kJ/m² |
| Charpy Notched Impact Strength | | ISO179/1eA | 10 kJ/m² |
| Charpy Notched Impact Strength | | ISO179/1eA | 13 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | Break | ISO527-2/1A/5 | 200 MPa |
| Tensile strain | Break | ISO527-2/1A/5 | 3.1 % |
| Flexural modulus | | ISO178 | 11800 MPa |
| Bending stress | | ISO178 | 300 MPa |
| Tensile modulus | | ISO527-2/1A/1 | 13000 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC60093 | 1E+12 ohms |
| Volume resistivity | | IEC60093 | 1E+15 ohms·cm |
| CTI | | IEC60112 | 500 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/Af | 205 °C |
| vicat | | ISO306/B50 | 210 °C |
| melting temperature | | ISO11357 | 220 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare