Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Color L | | ME12 | 87.8to90.8 |
| MercuryContent | | IEC 62321 | <100 ppm |
| Color | | ME12 | OK |
| density | | IEC 60811-1-3 | 1.33to1.39 g/cm³ |
| CadmiumContent | | IEC 62321 | <50 ppm |
| ChromiumContent | | IEC 62321 | <100 ppm |
| Color A | | ME12 | -1.70-1.30 |
| Color B | | ME12 | 6.32to9.32 |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | NBR7456 | 78to82 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Bromine Content | | IEC 62321 | <100 ppm |
| Maximum Variables | | IEC 60811-1-2 | <25 % |
| lead | | IEC 62321 | <100 ppm |
| elongation at break | | IEC 60811-1-2 | <25 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | IEC 60811-1-1 | >12.6 MPa |
| Tensile strain | Yield | IEC 60811-1-1 | >150 % |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | IEC 60811-1-2 | >12.6 MPa |
| elongation | Break | IEC 60811-1-2 | >150 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | NBR5403 | >1.0E+13 ohms·cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare