Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|---|---|---|
density | ISO 1183 | 1.21 g/cm3 | |
Shrinkage rate | Flow | ISO 2577 | 0.3-0.7 % |
Mechanical properties | Test Condition | Test Method | Test Result |
---|---|---|---|
Impact strength of cantilever beam gap | ISO 180/1A | 8 kJ/m2 | |
Flexural modulus | ISO 178 | 4830 MPa | |
bending strength | ISO 178 | 150 MPa | |
tensile strength | Yield | ISO 527-2 | 100 MPa |
elongation | Yield | ISO 527-2 | 2.5 % |
Break | ISO 527-2 | 2.5 % |
Electrical performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Volume resistivity | ASTM D257 | 1E+15 ohm·cm | |
dielectric strength | ASTM D149 | 18 kV/mm | |
Compared to the Leakage Tracking Index (CTI) | PLC 0 |
Thermal performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Heat distortion temperature | ISO 75-2/A | 214 ℃ | |
melting temperature | ASTM D789 | 257 ℃ | |
UL flame retardant rating | UL 94 | HB | |
Limiting Oxygen Index | ISO 4589-2 | 25 % | |
FMVSS combustion rate | FMVSS 302 | PASS |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top