LDPE+LLDPE PRE-ELEC® PE 1271

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTMD792	1.02 g/cm³
density	density		ISO1183	1.02 g/cm³
melt mass-flow rate		ISO1133	35 g/10min
melt mass-flow rate	melt mass-flow rate		ISO1133	1.7 g/10min

Supplementary Information	Test Condition	Test Method	Test Result
BlowMoldingBarrelTemperature			160to200 °C
Blow-upRatio			>1.80

Mechanical properties	Test Condition	Test Method	Test Result
Tensile stress		ISO527-2	15.0 MPa
	Tensile stress		ISO527-2	21.0 MPa
		Tensile stress		ISO527-2	22.0 MPa
		Tensile stress	Tensile stress		ISO527-2	24.0 MPa
tensile strength	Across Flow	ASTMD638	22.1 MPa
elongation		ASTMD638	17 %
elongation	elongation		ASTMD638	13 %
Tensile strain		ISO527-2	17 %
Tensile strain	Tensile strain		ISO527-2	13 %
elongation	Break	ASTMD638	600 %
elongation	elongation		ASTMD638	590 %
Tensile strain		ISO527-2	600 %
Tensile strain	Tensile strain		ISO527-2	590 %
tensile strength		ASTMD638	24.1 MPa
	tensile strength		ASTMD638	15.2 MPa
	tensile strength	tensile strength		ASTMD638	21.4 MPa

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		ESDSTM11.11	<1.0E+5 ohms
Surface Resistivity	Surface Resistivity		IEC61340-2-3	<1.0E+5 ohms

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top