PEEK PEEK-OPTIMA® LT3 Invibio Inc.

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

Filling analysis	Test Condition	Test Method	Test Result	Test Unit
MeltViscosity		Internal Method	0.160	kPa
impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	--	ISO 180	4.5	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	--2	ISO 180	4.7	kJ/m²
Suspended wall beam without notch impact strength		ISO 180	无断裂
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength		ISO 178	170	MPa
Compressive stress		ISO 604	135	MPa
shear modulus		ISO 15310	1000	MPa
shear strength		ASTM D732	88.0	MPa
Poisson's ratio		ASTM D638	0.36
tensile strength	Yield	ISO 527-2	108	MPa
tensile strength	tensile strength	Yield2	ISO 527-2	115	MPa
Tensile strain	Break	ISO 527-2	25	%
Tensile strain	Tensile strain	Break2	ISO 527-2	20	%
Bending modulus	--	ISO 178	4200	MPa
Bending modulus	Bending modulus	--2	ISO 178	4000	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
RTI		UL 746	260	°C
Melting temperature			340	°C
Linear coefficient of thermal expansion	MD：--3	ASTM D696	4.7E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD：--4	ASTM D696	1.1E-04	cm/cm/°C
RTI Elec		UL 746	260	°C
RTI Imp		UL 746	260	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.30	g/cm³
Shrinkage rate	MD：210°C		1.3	%
Water absorption rate	23°C,24hr	ISO 62	0.50	%
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	M-Scale	ASTM D785	99

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top