PES LNP™ THERMOCOMP™ JF004 compound
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.51 g/cm³ | |
| ISO 1183 | 1.51 g/cm³ | ||
| Shrinkage rate | ASTM D955 | 0.50to0.70 % | |
| ASTM D955 | 0.60to0.80 % | ||
| ISO 294-4 | 0.60to0.80 % | ||
| ISO 294-4 | 0.50to0.70 % | ||
| Water absorption rate | ASTM D570 | 0.40 % | |
| ISO 62 | 0.74 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | ISO 178 | 183 MPa | |
| Tensile modulus | ASTM D638 | 7360 MPa | |
| ISO 527-2/1 | 7590 MPa | ||
| tensile strength | Break | ASTM D638 | 114 MPa |
| Break | ISO 527-2 | 109 MPa | |
| elongation | Break | ASTM D638 | 2.8 % |
| Tensile strain | Break | ISO 527-2 | 2.9 % |
| Flexural modulus | ASTM D790 | 6690 MPa | |
| ISO 178 | 6420 MPa | ||
| bending strength | ASTM D790 | 186 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 53 J/m | |
| ISO 180/1A | 7.1 kJ/m² | ||
| ASTM D4812 | 410 J/m | ||
| Suspended wall beam without notch impact strength | ISO 180/1U | 73 kJ/m² | |
| Dart impact | ASTM D3763 | 15.8 J | |
| Multi axis Instrumented Impact Energy | ISO 6603-2 | 4.49 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 206 °C | |
| ISO 75-2/Af | 205 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top