
TPE G7680-1 SUZHOU GLS
10
Form:Granules | Grade:Food grade
Properties:
UV resistanceColoringOzone resistant
Typical Applications:
ToyWasherpackingPhone caseProfilePolyonePolyOne USA
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Toy | Washer | packing | Phone case | Profile | Polyone | PolyOne | USA |
| Properties: | UV resistance | Coloring | Ozone resistant |
Certificates
No Data...
Technical Data Sheet
| Filling analysis | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Apparent viscosity | 200°C,1340sec^-1 | ASTM D3835 | 47.3 | Pa·s |
| 200°C,11200sec^-1 | ASTM D3835 | 10.9 | Pa·s | |
| elastomer | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | 300%Strain,23°C | ASTM D412 | 4.55 | Mpa |
| Break,23°C | ASTM D412 | 7.93 | Mpa | |
| elongation | Break,23°C | ASTM D412 | 660 | % |
| tear strength | ASTM D624 | 34.1 | kN/m | |
| Permanent compression deformation | 23°C,22hr | ASTM D395B | 23 | % |
| tensile strength | 100%Strain,23°C | ASTM D412 | 3.90 | Mpa |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 200°C/5.0kg | ASTM D1238 | 33 | g/10min |
| Shrinkage rate | MD | ASTM D955 | 0.60-1.4 | % |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Shore hardness | ShoreA,10Sec | ASTM D2240 | 81 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.