
PA6 9B22150 GF50 4Plas
Properties:
Filler glass fiber reinforced material 50% filler by weight
Product Description
Certificates(0)
Datasheet
Product Description
| Properties: | Filler | glass fiber reinforced material | 50% | filler by weight |
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Elongation at Break | 23°C | ISO 527-2 | 2 | % |
| tensile strength | 23°C | ISO 527-2 | 160 | MPa |
| Bending modulus | 23°C | ISO 178 | 10500 | MPa |
| bending strength | 23°C | ISO 178 | 300 | MPa |
| Tensile modulus | 23°C | ISO 527-2 | 13500 | MPa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Vicat softening temperature | Melting Temperature | ISO 11357-3 | 223 | °C |
| ISO 306/B50 | 210 | °C | ||
| Hot deformation temperature | 1.80MPaAnnealed | ISO 75-2/Af | 210 | °C |
| 0.45MPaUnannealed | ISO 75-2/Bf | 215 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | (23°C,50RH) | ISO 62 | 1.5 | % |
| density | ISO 1183 | 1.55 | g/cm³ | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | IEC 60093 | 1E+15 | Ω.cm | |
| Dissipation factor | 相对漏电起痕指数 | IEC 60112 | 500 | V |
| Surface resistivity | IEC 60093 | 1E+13 | Ω.cm | |
| flame retardant performance | Test Condition | Test Method | Test Result | Test Unit |
| Ignition temperature of heating wire | 2.00mm | IEC 60695-2-12 | 650 | °C |
| UL flame retardant rating | UL -94 | HB | 3.20mm | |
| UL -94 | HB | 1.60mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.