PA66 MN301-G30F BRICI BEIJING

Form：Granules | Grade：Injection grade

Properties:

Glass fiber reinforcedHigh hardnessHigh toughness10% glass fiber reinforceThis product has excellen

Typical Applications:

Laptop caseSwitch panelFitness equipmentElectrical enclosureFastenersFor connectorsSocketswitchElectric tool componentsElectrical coverFasteners etc

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Laptop case \| Switch panel \| Fitness equipment \| Electrical enclosure \| Fasteners \| For connectors \| Socket \| switch \| Electric tool components \| Electrical cover \| Fasteners \| etc
Properties:	Glass fiber reinforced \| High hardness \| High toughness \| 10% glass fiber reinforce \| This product has excellen

Certificates

No Data...

Technical Data Sheet

processability	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate		ISO 294-4	0.4-0.7	%
Spiral flow length			25	CM
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ISO 527	150	Mpa
elongation	Break	ISO 527	2.5	%
bending strength		ISO 178	240	Mpa
Bending modulus		ISO 178	8.5*103	Mpa
Charpy Notched Impact Strength	Notched	ISO 179（leA）	12	kJ/m²
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.82MPa	ASTM D790/ISO 178	240	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23℃，24hr	ISO 62	0.82	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	106HZ	IEC 60250	3.4
Dielectric loss	106HZ，Tangent	IEC 60250	1.5*10-2
Volume resistivity		IEC 60093	1*10-14	Ω。m
Dielectric strength		IEC 60243	33	KV/m
Arc resistance		IEC 61621	--	sec
Compared to the anti leakage trace index		IEC 60112	PLC 2
ash content			30	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top