GPPS 15NFI LG CHEM KOREA

Form：Granules | Grade：High liquidity level

Properties:

High transparencyModerate heat resistanceHigh adhesionHigh mobility

Typical Applications:

Electrical fieldElectronic fieldfilmsheetKitchen utensilsWood partsImitationFood containers

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical field \| Electronic field \| film \| sheet \| Kitchen utensils \| Wood parts \| Imitation \| Food containers
Properties:	High transparency \| Moderate heat resistance \| High adhesion \| High mobility

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
High voltage arc tracing rate		UL 746A	PLC 0
High arc combustion index		UL 746A	PLC 0
Hot wire ignition		UL 746A	PLC 5
Arc resistance		ASTM D-495	PLC_5
Compared to the anti leakage trace index		UL 746A	PLC 5
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-scale	ASTM D-785	119
bending strength	15mm/min	ASTM D-790	850	kg/cm
tensile strength	50mm/min	ASTM D638	450	kg/cm
Impact strength of cantilever beam gap	Notched 1/8"	ASTM D-256	1.5	kg.cm/cm
elongation	50mm/min	ASTM D-638	4	%
Bending modulus	15mm/min	ASTM D-790	32000	kg/cm
Impact strength of cantilever beam gap	Notched 1/4"	ASTM D-256	1.1	kg.cm/cm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Combustibility	1/8"	UL 94	HB
Vicat softening temperature	1000g	ASTM D-1525	98	°C
Combustibility	1/8"	IEC 707	FH3-28	mm/min
Hot deformation temperature	Unannealed 18.5kg/cm	ASTM D-648	82	°C
Combustibility	1/16"	UL 94	HB
melt mass-flow rate	220℃/5Kg	ASTM D-1238	9	g/10min
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate		ASTM D-955	0.4-0.8	%
density		ASTM D-792	1.05

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top