PC/ABS 210NH SAMYANG KOREA

Form：Granules | Grade：Injection grade

Properties:

heat-resistingHigh impact resistance

Typical Applications:

Dash boardShellCar exterior decoration

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Dash board \| Shell \| Car exterior decoration
Properties:	heat-resisting \| High impact resistance

Certificates

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5mm	UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ASTM D638	58.8	Mpa
elongation	Break	ASTM D638	100	%
Bending modulus		ASTM D790	2650	Mpa
bending strength	Yield	ASTM D790	88.3	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	103	°C
Linear coefficient of thermal expansion	MD	ASTM D696	8.3E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	260°C/2.16kg	ASTM D1238	30	g/10min
Shrinkage rate	MD	ASTM D955	0.50-0.70	%
Water absorption rate	23°C,24hr	ASTM D570	0.20	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257	9E+16	ohms·cm
Dielectric strength		ASTM D149	30	KV/mm
Dielectric constant		ASTM D150	3.00
Dissipation factor		ASTM D150	9E-03
Arc resistance		ASTM D495	120	sec
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ASTM D785	115

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top