Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.15 g/cm³ |
| other | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Break | ASTM D638 | 60 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC 60093 | > 1.0E+15 ohm |
| Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | IEC 60093 | > 1.0E+15 ohm·cm |
| melt mass-flow rate | | ASTM D1238 | 12 g/10 min |
| Shrinkage rate | | ASTM D955 | 0.5-0.7 % |
| Rockwell hardness | | ASTM D785 | 110 |
| elongation | Break | ASTM D638 | 80 % |
| Flexural modulus | | ASTM D790 | 2100 MPa |
| bending strength | | ASTM D790 | 70 MPa |
| Impact strength of cantilever beam gap | | ASTM D256 | 400 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTM D648 | 108 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare