PA66 AS-V0 NC EMS-CHEMIE SWITZERLAND

Form：Granules | Grade：Flame retardant grade

Properties:

High hardnessHigh temperature resistan

Typical Applications:

Industrial machineryHousehold daily necessities

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Industrial machinery \| Household daily necessities
Properties:	High hardness \| High temperature resistan

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	65	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
Flammability level		UL 94	V-0
Flammability level	Flammability level		UL 94	V-0
Extreme Oxygen Index		ISO 4589-2	32	%
ISO Type		ISO 1874	PA 66. MFHR. 14-040
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	3900	Mpa
tensile strength	Yield	ISO 527-2	90.0	Mpa
tensile strength	tensile strength	Break	ISO 527-2	80.0	Mpa
Tensile strain	Yield	ISO 527-2	4.0	%
Nominal tensile fracture strain		ISO 527-2	9.0	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	225	°C
Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	75.0	°C
Continuous use temperature	--3	ISO 2578	90.0 to 110	°C
Continuous use temperature	Continuous use temperature	--4	Internal Method	200	°C
Melting temperature		ISO 11357-3	260	°C
Linear coefficient of thermal expansion	Flow	ISO 11359-2	6.0E-5	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	9.0E-5	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	横向Flow	ISO 294-4	1.1	%
Shrinkage rate	Shrinkage rate	Flow	ISO 294-4	0.90	%
Water absorption rate	Saturation, 23°C	ISO 62	7.0	%
Water absorption rate	Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	2.0	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	--	ohms
Volume resistivity		IEC 60093	1.0E+14	ohms·cm
Dielectric strength		IEC 60243-1	31	KV/mm
Relative permittivity	100 Hz	IEC 60250	3.00
Relative permittivity	Relative permittivity	1 MHz	IEC 60250	4.00
Dissipation factor	100 Hz	IEC 60250	3.0E-3
Dissipation factor	Dissipation factor	1 MHz	IEC 60250	0.020
Compared to the anti leakage trace index		IEC 60112		V

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top