Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | g/cm³ | 1.14 -- |
| Water absorption rate | | % | 2.5to3.0 -- |
| Water absorption rate | | % | 8.5to10 -- |
| hardness | Test Condition | Test Method | Test Result |
|---|
| ball-indentation hardness | | MPa | 160 50.0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | MPa | 3200 1800 |
| tensile strength | Yield | MPa | 80.0 42.0 |
| tensile strength | Break | MPa | 130 40.0 |
| Tensile strain | Break | % | >50 >160 |
| Flexural modulus | | MPa | 2500 1400 |
| coefficient of friction | Steel - Dynamic | | 0.040 0.080 |
| coefficient of friction | Steel - Static | | 0.38 0.42 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | | 无断裂 |
| Suspended wall beam without notch impact strength | | | 无断裂 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ohms | 1E+12 1E+10 |
| dielectric strength | | kV/mm | 50 20 |
| dielectric constant | | | 3.70 7.00 |
| Dissipation Factor | | | 0.031 0.30 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | °C | 95.0 -- |
| melting temperature | | °C | 220 -- |
| Linear coefficient of thermal expansion | | cm/cm/°C | 7.0E-5到1.0E-4 -- |
| specific heat | | J/kg/°C | 1670 -- |
| thermal conductivity | | W/m/K | 0.23 -- |
| Heat distortion temperature | | °C | 190 -- |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare