LCP GA130 TAIWAN POLYPLASTICS

Form：Granules

Properties:

Low warpagehigh strengthFiller: Glass fiber reinf30%Filler by weight

Typical Applications:

Home appliance componentsElectrical applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Home appliance components \| Electrical applications
Properties:	Low warpage \| high strength \| Filler: Glass fiber reinf \| 30% \| Filler by weight

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ASTM D638	150	Mpa
elongation	Break	ASTM D638	1.6	%
Bending modulus		ISO 178	15000	Mpa
bending strength		ISO 178	200	Mpa
Bending strain		ISO 178	1.8	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	280	°C
Hot deformation temperature	Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	300	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	TD:1.00mm	Internal Method	0.42	%
Shrinkage rate	Shrinkage rate	MD:1.00mm	Internal Method	0.10	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	3E+16	ohms·cm
Dielectric strength	1.00mm	IEC 60243-1	48	KV/mm
Dielectric strength	Dielectric strength	3.00mm	IEC 60243-1	23	KV/mm
Relative permittivity	1kHz	IEC 60250	4.10
Relative permittivity	Relative permittivity	1MHz	IEC 60250	3.70
Dissipation factor	1kHz	IEC 60250	0.020
	Dissipation factor	1MHz	IEC 60250	0.030
	Dissipation factor	Dissipation factor	耐电弧性	IEC 60250	127	sec
Compared to the anti leakage trace index		IEC 60112		V
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
ColourNumber			VF2201/BK210P

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top