PP Moplen EP300H
70
- Properties:Low temperature impact reHigh impact resistanceImpact resistanceBlock copolymerization
- Usages:small home appliancesbuilding materials
Compare
View PricesTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 0.90 g/cm³ | |
| melt mass-flow rate | 1.8 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | 1150 Mpa | ||
| elongation | ASTM D-638 | 9 % | |
| tensile strength | ASTM D-638 | 25 Mpa | |
| Impact strength of cantilever beam gap | no break J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D-648 | 88 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top