Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.70 g/cm³ |
| melt mass-flow rate | | ASTM D3159 | 7.0 g/10min |
| Water absorption rate | | ASTM D570 | 7E-03 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D2240 | 67 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | ASTM D2863 | 30to32 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | NoBreak |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D3159 | 45.0 MPa |
| elongation | | ASTM D3159 | 300 % |
| Flexural modulus | | ASTM D790 | 1200 MPa |
| compressive strength | | ASTM D695 | 38.0 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D257 | 1E+17 ohms·cm |
| dielectric strength | | ASTM D149 | 70 kV/mm |
| dielectric constant | | ASTM D1531 | 2.50to2.60 |
| Dissipation Factor | | ASTM D1531 | 3.1E-03 |
| arc resistance | | ASTM D495 | 122 sec |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| melting temperature | | ASTM D3159 | 255to280 °C |
| Linear coefficient of thermal expansion | | ASTME831 | 1.3E-04 cm/cm/°C |
| maximum service temperature | | UL 746 | 150 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare