PA12 4033 SA 01 ARKEMA FRANCE

Form：Granules | Grade：Extrusion grade

Properties:

High temperature resistanLow temperature resistanc

Typical Applications:

Medical Supplies

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Medical Supplies
Properties:	High temperature resistan \| Low temperature resistanc

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	-30℃-30°C	ISO 179	No Break
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23℃23°C	ISO 179	No Break
Impact strength of simply supported beam without notch	-30℃-30°C	ISO 179	No Break
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23℃23°C	ISO 179	No Break
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	Shore AShore A	ISO 868	90
	Shore hardness	Shore A，15 SecShore A, 15 sec	ISO 868	89
		Shore hardness	Shore DShore D	ISO 868	42
		Shore hardness	Shore hardness	Shore D，15 SecShore D, 15 sec	ISO 868	35
tensile strength	BreakBreak	ISO 527-2	40	Mpa
Tensile strain	BreakBreak	ISO 527-2	> 450	%
Bending modulus		ISO 178	77	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ISO 306	131	°C
Melting temperature		ISO 11357-3	160	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	TD：4.0 mm，24 hrsAcross Flow : 24 hr, 4.00 mm	Internal Method	1.1	%
Shrinkage rate	Shrinkage rate	MD：4.0 mm，24 hrsFlow : 24 hr, 4.00 mm	Internal Method	0.4	%
Water absorption rate	Equilibrium，23℃，50% RHEquilibrium，23℃，50% RH	ISO 62	0.5	%
Water absorption rate	Water absorption rate	23℃，24hr23℃，24 hr	ISO 62	1.2	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top