PA6 YH-700 SINOPEC BALING
45
- Properties:Medium viscosityMedium viscosity
- Usages:Fiber gradeMonofilamentSuitable for general injection moldingFlame retardant modification and spinning of brownMonofilamentetc.
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| relative viscosity | GB/T 1632-93 | 2.75±0.03 --- | |
| density | GB 1033-86 | 1.156 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation at break | GB 1040-92 | 151.7 % | |
| Impact strength of cantilever beam gap | GB 9342-88 | 20.1 KJ/m | |
| Shore hardness | GB 9341-88 | 64.4 R | |
| bending strength | GB 9341-88 | 86.2 Mpa | |
| Shrinkage rate | GB/T 1043-93 | 1.32 % | |
| Flexural modulus | GB 9341-88 | 2104 Mpa | |
| tensile strength | GB 1040-92 | 67.6 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | GB 1044-70 | 5.6*10 Ω | |
| Surface Resistivity | GB 1044-70 | 1.0*10 Ω | |
| GB 1044-70 | 1.3*10 Ω | ||
| Dielectric loss | GB 1045-70 | 4.0*10 | |
| dielectric constant | GB 1044-70 | 1.1 --- | |
| Volume resistivity | GB 1044-70 | 3.0*10 Ω.cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting temperature | 215～220 °C | ||
| Heat distortion temperature | 73.5 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top