
PBT 1551GN30 SAMYANG KOREA
44
Form:Granules | Grade:Injection grade
Properties:
Flame retardant
Product Description
Certificates(0)
Datasheet
Product Description
| Properties: | Flame retardant |
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | 0.750mm | UL 94 | V-0 | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Elongation at Break | ASTM D638/ISO 527 | 5 | % | |
| Rockwell hardness | R-Scale | ASTM D785 | 120 | |
| tensile strength | Yield | ASTM D638 | 118 | Mpa |
| elongation | Break | ASTM D638 | 2.0 | % |
| Bending modulus | ASTM D790 | 8340 | Mpa | |
| bending strength | Yield | ASTM D790 | 157 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 0.45MPa,Unannealed | ASTM D648 | 220 | °C |
| 1.8MPa,Unannealed | ASTM D648 | 205 | °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 3E-05 | cm/cm/°C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D792/ISO 1183 | 1.59 | g/cm³ | |
| Shrinkage rate | ASTM D955 | 0.7 | % | |
| Water absorption rate | 23℃/24H | ASTM D570/ISO 62 | 0.07 | % |
| melt mass-flow rate | 250°C/5.0kg | ASTM D1238 | 32 | g/10min |
| Shrinkage rate | MD | ASTM D955 | 0.20-1.2 | % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.070 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | ASTM D257 | 1E+16 | ohms·cm | |
| Dielectric strength | ASTM D149 | 20 | KV/mm | |
| Dielectric constant | ASTM D150 | 3.20 | ||
| Dissipation factor | ASTM D150 | 0.016 | ||
| Arc resistance | ASTM D495 | 110 | sec |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.