XLPE FR4803
0
- Properties:physical property
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| density | ISO 1183 | 1.15 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 0.40 g/10min | |
| Water absorption rate | IEC 60811-1-3 | 0.110 mg/cm² | |
| tensile strength | IEC 60811-1-1 | 11.0 MPa | |
| Tensile strain | IEC 60811-1-1 | 400 % | |
| Flexural modulus | ISO 178 | 205 MPa | |
| Shore hardness | ISO 868 | 39 | |
| ColdBend | IEC 60811-1-4 | Pass | |
| ColdImpact | IEC 60811-1-4 | Pass | |
| Change rate of tensile strength in air | ISO 1817 | >-80 % | |
| IEC 60811-1-2 | >-80 % | ||
| Volume resistivity | IEC 60093 | 4.5E+16 ohms·cm | |
| ConeCalorimeter | ISO 5660 | 29.0 | |
| ISO 5660 | 2.6 min | ||
| ISO 5660 | 282 kW/m² | ||
| ISO 5660 | 506 | ||
| Corrosion-ofCombustionFumes | IEC 60754-2 | 1.50 µS/cm | |
| compressive strength | IEC 60811-3-1 | 9.0 % | |
| dielectric strength | IEC 60243-1 | 20 kV/mm | |
| Limiting Oxygen Index (LOI) | ISO 4589-2 | 31 % | |
| BreakdownDuration | IEC 60227-2/2.3 | Pass | |
| Breakdown voltage strength | ISO 6722 | 40000 V | |
| ConeCalorimeter | ISO 5660 | 175 kW/m² | |
| ISO 5660 | 0.0140 kg/m³ | ||
| ISO 5660 | 1.85 kg/m³ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top