Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.90 g/cm³ |
| Shrinkage rate | | ASTMD955 | 0.10to0.20 % |
| Water absorption rate | | ASTMD570 | 0.050 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Barcol Hardness | | ASTMD2583 | 40 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | V-0 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | Compression Molded | ASTMD256 | 400 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 48.3 MPa |
| bending strength | Compression Molded | ASTMD790 | 131 MPa |
| compressive strength | | ASTMD695 | 179 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTMD149 | 14 kV/mm |
| arc resistance | | ASTMD495 | 180 sec |
| Compared to the Leakage Tracking Index (CTI) | | UL746 | 600 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 260 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare