TPE OM 3060-1 SUZHOU GLS

Form：Granules | Grade：Extrusion grade

Properties:

ProcessabilityGood forming performanceGood colorabilityHigh transparency

Typical Applications:

Transparent partsWrapping moldingElectrical fieldElectronic fieldPersonal caretransparentTranslucent accessoriesConsumer goods sectorMedical suppliesNursing supplies

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Transparent parts \| Wrapping molding \| Electrical field \| Electronic field \| Personal care \| transparent \| Translucent accessories \| Consumer goods sector \| Medical supplies \| Nursing supplies
Properties:	Processability \| Good forming performance \| Good colorability \| High transparency

Certificates

No Data...

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
Apparent viscosity	200℃，11200sec~1	ASTM D3835	15.0	Pa.s
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Permanent compression deformation	23℃，22.0hr	ASTM D395B	33	%
tear strength		ASTM D624	31.5	kN/m
Elongation at Break	23℃	%	460
tensile strength	100%Strain，23℃	ASTM D412	2.90	MPa
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate		ASTM D955	0.80-1.2	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top