PA6 830
0
- Properties:Universalmedium viscositycompliant with FEDL-P-395C standards
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 1.13 g/cm3 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | R计称 | 120 |
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23℃ | 58.7 J/m | |
| 1.8MPa，未退火 | 62.8 ℃ | ||
| melting temperature | 216 ℃ | ||
| dielectric strength | 1MHz | 3.5 | |
| Shrinkage rate | 流动 | 1.2 % | |
| Water absorption rate | 24小时 | 1.6 % | |
| 饱和 | 2.8 % | ||
| tensile strength | 82.7 MPa | ||
| tensile elongation | 屈服 | 8.0 % | |
| 断裂 | 75 % | ||
| Flexural modulus | 2690 MPa | ||
| bending strength | 113 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric strength | 17 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 0.45MPa，未退火 | 182 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top