
PPO SE100X-701 BK SABIC INNOVATIVE US
104
Form:Granules | Grade:Injection grade
Properties:
Flame retardantRemarks: V-1HDT/1.8MPA100°C
Typical Applications:
Electronic communication accessoriesElectronic communication accessories
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electronic communication accessories | Electronic communication accessories |
| Properties: | Flame retardant | Remarks: V-1 | HDT/1.8MPA | 100°C |
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D-256 | 256 | J/m |
| tensile strength | Yield点,3.2mm | ASTM D-638 | 58 | Mpa |
| Break点,3.2mm | ASTM D-638 | 25 | Mpa | |
| bending strength | 6.4mm | ASTM D-790 | 83 | Mpa |
| Rockwell hardness | ASTM D-785 | 115 | ||
| Bending modulus | 6.4mm | ASTM D-790 | 2308 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 0.45MPa | ASTM D-648 | 102-110 | °C |
| 1.8MPa | ASTM D-648 | 92-100 | °C | |
| Long term use temperature | 电气 | UL 746B | 95 | °C |
| 含冲击 | UL 746B | 85 | °C | |
| 无冲击 | UL 746B | 95 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | 3.2mm | ASTM D-955 | 5-7 | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Surface resistivity | ASTM D-257 | 1.0×10 | Ω.cm | |
| Volume resistivity | ASTM D-257 | 3.0×10 | Ω.cm | |
| Dielectric constant | 1MHz | ASTM D-150 | 2.57 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.