Share
Add to compare

Epoxy 650 Smooth-On, Inc

Product Description
Certificates(0)
Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
Compressive modulus--3ASTM D695983MPa
compressive strength--3ASTM D695113MPa
compressive strength--2ASTM D695110MPa
Compressive modulus--2ASTM D695927MPa
bending strength--2ASTM D79074.8MPa
bending strength--3ASTM D79040.6MPa
Bending modulus--3ASTM D7904900MPa
Bending modulus--2ASTM D7905340MPa
elongationBreak2ASTM D6380.82%
elongationBreak3ASTM D6380.42%
tensile strengthBreak3ASTM D63841.4MPa
tensile strengthBreak2ASTM D63847.6MPa
Tensile modulus--3ASTM D63810400MPa
Tensile modulus--2ASTM D6387440MPa
thermosettingTest ConditionTest MethodTest ResultTest Unit
Thermosetting mixed viscosity--2ASTM D23935000cP
Thermosetting mixed viscosity--3ASTM D23937000cP
storage stability--9180min
storage stability--8210min
storage stability--790min
Thermosetting components按重量计算的混合比100
Thermosetting componentsPartB8按重量计算的混合比:14
Thermosetting componentsPartB9按重量计算的混合比:10
storage stability--620min
Thermosetting components按重量计算的混合比100
Thermosetting components按重量计算的混合比100
Thermosetting components按重量计算的混合比100
Thermosetting componentsPartB6按重量计算的混合比:12
Thermosetting componentsPartB7按重量计算的混合比:13
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Hot deformation temperature1.8MPa,Unannealed4ASTM D64853.9°C
Hot deformation temperature1.8MPa,Unannealed5ASTM D64886.1°C
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
Specific volumeASTM D7920.658cm³/g
densityASTM D14751.52g/cm³
hardnessTest ConditionTest MethodTest ResultTest Unit
Babbitt hardnessASTM D224093
Supplementary InformationTest ConditionTest MethodTest ResultTest Unit
CureTime66°C60.5hr
CureTime23°C1024.0hr
CureTime23°C824.0hr
CureTime23°C74.0hr
CureTime23°C61.0hr
CureTime66°C72.0hr
CureTime66°C86.0hr
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.