Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Environmental stress cracking resistance | | ASTM D-1693B | 2 hrs |
| Tensile modulus | | ASTM D-638 | 354 Mpa |
| other | Test Condition | Test Method | Test Result |
|---|
| characteristic | | | 光泽度优异、高流动性、快速循环注塑性能好 |
| purpose | | | 容器、瓶盖及深腔注塑件 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D-1238 | 50 g/10min |
| density | | ASTM D-1505 | 0.926 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D-256 | 450 J/m |
| elongation at break | | ASTM D-638 | 120 % |
| Shore hardness | | ASTM D-2240 | 55 Shore D |
| tensile strength | | ASTM D-638 | 12.4 % |
| tensile strength | | ASTM D-638 | 13 Mpa |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 0.926 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| vicat | | ASTM D-1525 | 88 °C |
| vicat | | ASTM D1525/ISO R306 | 88 ℃（℉） |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices