
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Tensile modulus | 23℃ | ISO 527 | 3200 | Mpa |
| tensile strength | Break,23℃ | ISO 527 | 70 | Mpa |
| Elongation at Break | 23℃ | ISO 527 | 15 | % |
| Poisson's ratio | ISO 527 | 0.4 | ||
| bending strength | ISO 178 | 90 | Mpa | |
| Bending modulus | 23℃ | ISO 178 | 3200 | Mpa |
| Impact strength of cantilever beam gap | 23℃ | ISO 180 | 4.1 | kJ/m² |
| Charpy Notched Impact Strength | 23°C | ISO 179 | 4.3 | kJ/m² |
| Simply supported beam without notch impact at 23 ℃ | ISO 179 | 65 | kJ/m² | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Peak unannealed "MPa | ISO 75 | 75 | °C | |
| Network melting temperature | ISO 11357 | 265 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | 垂直,2.0mm,23℃ | ISO 294 | 1.7 | % |
| Flow,2.0mm,23℃ | ISO 294 | 1.4 | % | |
| Water absorption rate | 23℃ 24hr | ISO 62 | 0.8 | % |
| Equilibrium, 23°C, 50% RH | ISO 62 | 1.9 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistance 0.75mm | IEC 60093 | 1000000000000000000 | Ω.㎝ | |
| Dielectric strength | 1.0mm | IEC 60243 | 17 | KV/mm |
| CTI 3.0mm | IEC 60112 | 250〜399 | V |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.