PC H-3000VR MITSUBISHI THAILAND

Form：Granules | Grade：Injection grade

Properties:

High mobilityFlame retardantDemolding ability

Typical Applications:

partsFitness equipment

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	parts \| Fitness equipment
Properties:	High mobility \| Flame retardant \| Demolding ability

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap		ASTM D256	98	J/m
Bending modulus		ASTM D790	2.3	GPa
bending strength		ASTM D790	80.4-90.2	Mpa
Stretching length		ASTM D638	90-140	%
tensile strength		ASTM D638	58.8-68.6	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Combustibility		UL 94	V-2
Linear coefficient of thermal expansion			6-7
Hot deformation temperature	18.6kgf/cm	ASTM D648	125-130	°C
Hot deformation temperature	Hot deformation temperature	4.6kgf/cm	ASTM D648	130-135	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	Across Flow		05-0.8	%
Shrinkage rate	Shrinkage rate	Flow		05-0.8	%
Rockwell hardness		ASTM D785	123	R
Water absorption rate	23℃,24hrs	ASTM D570	0.23-0.26	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength		ASTM D149	18-22	KV/mm
Dielectric loss	10，Tangent	ASTM D150	0.0082
Dielectric constant	10	ASTM D150	25.2	Pf/m

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top