LCP E481i BK210P TAIWAN POLYPLASTICS

Form：Granules | Grade：Injection grade

Properties:

Low anisotropyLow warpage

Typical Applications:

Automotive componentsLaptop caseElectronic and Electrical ApplicationsHome appliance applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive components \| Laptop case \| Electronic and Electrical Applications \| Home appliance applications
Properties:	Low anisotropy \| Low warpage

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	V-0
Color number			VF2201/BK210P
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ASTM D638	115	Mpa
elongation	Break	ASTM D638	1.6	%
Bending modulus		ISO 178	13000	Mpa
bending strength		ISO 178	160	Mpa
Bending strain		ISO 178	1.7	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	260	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	横向Flow : 1.00 mm	Internal Method	0.28	%
Shrinkage rate	Shrinkage rate	Flow : 1.00 mm	Internal Method	0.060	%
Water absorption rate	24 hr, 23°C	ISO 62	0.020	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	2.0E+16	ohms·cm
Dielectric strength	1.00 mm	IEC 60243-1	47	KV/mm
Dielectric strength	Dielectric strength	3.00 mm	IEC 60243-1	25	KV/mm
Relative permittivity	1 kHz	IEC 60250	4.80
Relative permittivity	Relative permittivity	1 MHz	IEC 60250	4.10
Dissipation factor	1 kHz	IEC 60250	0.020
Dissipation factor	Dissipation factor	1 MHz	IEC 60250	0.020
Arc resistance		ASTM D495	182	sec
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	M -Sale	ISO 2039-2	60

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top