PP 5010
0
- Properties:Ultra high impact strength and low-temperature performance
- Usages:Pipesblow molded containers
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-1505 | 0.9 g/cm | |
| melt mass-flow rate | ASTM D-1238 | 0.5 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| hardness | ASTM D-2240 | 85 Shore D | |
| tensile yield strength | ASTM D-638 | 27.6 MPa | |
| elongation at break | ASTM D-638 | ≥500 % | |
| elongation at yield | ASTM D-638 | 15 % | |
| Flexural modulus | ASTM D-790 | 1310 MPa | |
| IZOD notch impact strength | ASTM D-256 | NB |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTM D-648 | 87 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top