PA66 A3EG7 BK BASF GERMANY

Form：Granules | Grade：Injection grade

Properties:

Dimensional stabilityOil resistantHigh rigidity

Typical Applications:

Mechanical componentsShellElectrical componentsAutomotive sectorcontainer

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Mechanical components \| Shell \| Electrical components \| Automotive sector \| container
Properties:	Dimensional stability \| Oil resistant \| High rigidity

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus	23°C	ISO 178	10000	Mpa
Tensile strain	Break, 23°C	ISO 527-2	2.8	%
tensile strength	Break, 23°C	ISO 527-2	190	Mpa
injection	Test Condition	Test Method	Test Result	Test Unit
Suggested maximum moisture content			0.15	%
drying time			2.0 to 4.0	hr
drying temperature			80	°C
Injection speed			快速
Injection pressure			3.50 to 12.5	Mpa
Mold temperature			80 to 90	°C
Processing (melt) temperature			280 to 305	°C
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		ISO 3146	260	°C
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	250	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	1.6	%
Water absorption rate	Water absorption rate	Saturation, 23°C	ISO 62	5.0	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top