HIPS HIPS-514
624
- Properties:heat-resistingHigh impact resistance
- Usages:ToyElectronic fieldElectrical field
- Certificates:UL
Compare
View PricesTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ISO 1133/1997 | 10 g/10min | |
| density | ISO 1183/1987 | 1030 kg/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ASTM D256/ISO 179 | 100 kg·cm/cm(J/M)ft·lb/in | |
| ASTM D256/ISO 179 | 750 kg·cm/cm(J/M)ft·lb/in | ||
| elongation at break | ASTM D638/ISO 527 | 50 % | |
| tensile strength | ASTM D638/ISO 527 | 23 kg/cm²(MPa)[Lb/in²] | |
| Flexural modulus | ISO 178/1993 | 2000 Mpa | |
| elongation | ISO 527-2/1993 | 50 % | |
| Impact strength of cantilever beam gap | ISO 180/1993 | 100 J/m | |
| tensile strength | ISO 527-2/1993 | 23 Mpa | |
| Impact strength of cantilever beam gap | ISO 180/1993 | 750 J/m |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.03 | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 10 g/10min |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648/ISO 75 | 74 ℃（℉） | |
| vicat | ASTM D1525/ISO R306 | 85 ℃（℉） | |
| Heat distortion temperature | ISO 75-2/1993 | 74 °C | |
| vicat | ISO 306/1994 | 85 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top