PP PPM-T03 SINOPEC ZHANJIANG DONGXING

Form：Granules | Grade：Injection grade

Properties:

high strengthwear resistant

Typical Applications:

Charger casingfibretubing

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Charger casing \| fibre \| tubing
Properties:	high strength \| wear resistant

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
Cleanliness			合格品｜≤20	个/kg
	Cleanliness			一级品｜≤10	个/kg
	Cleanliness	Cleanliness			优级品｜≤5	个/kg
Equal standard index			合格品｜≥96	%
	Equal standard index			一级品｜≥96	%
	Equal standard index	Equal standard index			优级品｜≥96	%
ash content			合格品｜≤0.02	%
	ash content			一级品｜≤0.02	%
	ash content	ash content			优级品｜≤0.02	%
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate			一级品｜3.00±0.5	g/10min
	melt mass-flow rate			优级品｜3.00±0.5	g/10min
	melt mass-flow rate	melt mass-flow rate			合格品｜3.00±0.9	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23℃		合格品｜≥32	J/m
	Impact strength of cantilever beam gap	23℃		一级品｜≥36	J/m
	Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23℃		优级品｜≥39	J/m
tensile strength	Yield		合格品｜≥30	Mpa
	tensile strength	Yield		一级品｜≥31	Mpa
	tensile strength	tensile strength	Yield		优级品｜≥32	Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top