PA6 TECAST™ 6XAU
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.15-1.16 g/cm³ | |
| Water absorption rate | ASTM D570 | 1.2 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 115 R |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 75.8 MPa | |
| elongation at break | ASTM D638 | 20 % | |
| Tensile modulus | ASTM D638 | 2410 MPa | |
| bending strength | ASTM D790 | 86.2 MPa | |
| Flexural modulus | ASTM D790 | 2410 MPa | |
| Impact strength of cantilever beam gap | ASTM D256 | 37.0 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+14 Ω.cm | |
| dielectric strength | ASTM D149 | 19.7 KV/mm | |
| dielectric constant | ASTM D150 | 3.7 60Hz | |
| Dissipation Factor | ASTM D150 | 0.002 60Hz |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 93.3 °C | |
| Linear coefficient of thermal expansion | ASTM D696 | 7.2E-04 cm/cm／°C | |
| ASTM D2133 | 220 °C | ||
| 177 °C | |||
| Heat distortion temperature | ASTM D648 | 188 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top