PC 4800-10 STYRON TAIWAN

Form：Granules | Grade：Flame retardant grade

Properties:

High impact resistance

Typical Applications:

Electrical fieldElectronic field

Supplier(1)

Product Description

Certificates(0)

Datasheet

Alternative Model(1)

Product Description

Typical Applications:	Electrical field \| Electronic field
Properties:	High impact resistance

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
Glow wire combustion index (GWFI)	2.0mm	IEC 695-2-1	960	°C
Limiting Oxygen Index (LOI)		ASTM D-2863	36	%
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	300℃/1.2kg	ASTM D-1238	10	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Break	ASTM D-638	59	Mpa
Impact strength of cantilever beam gap	总能量@23℃	ASTM D-1822	631	KJ/m
Rockwell hardness		ASTM D-785	59	M Scale
tensile strength	Yield	ASTM D-638	61	Mpa
Bending modulus		ASTM D-790	2330	Mpa
bending strength		ASTM D-790	98	Mpa
elongation	Break	ASTM D-638	115	%
Impact strength of cantilever beam gap	23℃	ASTM D-256	未破裂
Tensile modulus		ASTM D-638	2380	Mpa
Impact strength of cantilever beam gap	23℃	ASTM D-256	694	J/m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature	50℃/hr，50n重	ASTM D-1525	151	°C
Hot deformation temperature	Annealed@0.45MPa	ASTM D-648	137	°C
Shrinkage rate		ASTM D-696	65×10	mm/mm/℃
Hot deformation temperature	Unannealed@1.82MPa	ASTM D-648	127	°C
Ball indentation temperature		IEC 598-1	＞125	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate		ASTM D-955	0.005-0.007	mm/mm
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the Leakage Traceability Index (CTI)	2.0mm	IEC 112	225	V

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top