Share
Add to Compare

ABS 10H20000 A-M 4Plas

Product Description
Certificates(0)
Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performanceTest ConditionTest MethodTest ResultTest Unit
Impact strength of cantilever beam gap23°CISO 180/1A15kJ/m²
flammabilityTest ConditionTest MethodTest ResultTest Unit
UL flame retardant rating1.6mmUL 94HB
UL flame retardant rating3.2mmUL 94HB
Burning wire flammability index2.0mmIEC 60695-2-12650°C
mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
Tensile modulus23°CISO 527-2/52600MPa
tensile strengthBreak,23°CISO 527-2/543.0MPa
Tensile strainBreak,23°CISO 527-2/53.0%
bending strengthISO 17870.0MPa
Tensile modulus23°CISO 527-2/52600MPa
tensile strengthBreak, 23°CISO 527-2/543.0MPa
Tensile strainBreak, 23°CISO 527-2/53.0%
bending strengthISO 17870MPa
Impact strength of cantilever beam gap23°CISO 180/1A15kJ/m²
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B97.0°C
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A94.0°C
Vicat softening temperatureISO 306/B108.0°C
UL flame retardant rating1.60 mmUL 94HB
UL flame retardant rating3.20 mmUL 94HB
Hot deformation temperature0.45 MPa, UnannealedISO 75-2/B97.0°C
Hot deformation temperature1.8 MPa, UnannealedISO 75-2/A94.0°C
Burning wire flammability index2.00 mmIEC 60695-2-12650°C
Vicat softening temperatureISO 306/B108°C
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
densityISO 11831.04g/cm³
melt mass-flow rate230°C/3.8kgISO 113312to16g/10min
Shrinkage rateISO 25570.30to0.60%
densityISO 11831.04g/cm³
melt mass-flow rate230°C/3.8 kgISO 113312-16g/10 min
Shrinkage rateTD0.30-0.60%
Electrical performanceTest ConditionTest MethodTest ResultTest Unit
Compared to the anti leakage trace indexIEC 60112PLC 1
Compared to the anti leakage trace indexIEC 60112PLC 1
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.