DAP Cosmic DAP K61/6230 Cosmic Plastics, Inc.

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap			160to320	J/m
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
compressive strength			165to207	MPa
bending strength			89.6to117	MPa
tensile strength			41.4to68.9	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT		260	°C
Linear coefficient of thermal expansion	MD：-40to100°C		2.4E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density			1.72	g/cm³
Shrinkage rate			6.0
Shrinkage rate	Shrinkage rate	MD		0.10to0.40	%
dimensional stability			<0.010	%
Water absorption rate	Equilibrium,50°C		0.25	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	1MHz7		0.013
Dissipation factor	Dissipation factor	耐电弧性		180	sec
Dielectric strength	Dry		64000	V
Dielectric strength	Dielectric strength	Wet		60000	V
Volume resistivity	--4		3E+10	ohms·cm
Dielectric strength	Dry		16	kV/mm
Dielectric strength	Dielectric strength	Wet		16	kV/mm
Dielectric constant	1kHz6		4.00
	Dielectric constant	1kHz7		4.10
		Dielectric constant	1MHz6		3.80
		Dielectric constant	Dielectric constant	1MHz7		3.90
Dissipation factor	1kHz6		8E-03
	Dissipation factor	1kHz7		9E-03
	Dissipation factor	Dissipation factor	1MHz6		0.012
Volume resistivity	--3		>1.0E+16	ohms·cm
Surface resistivity	--4		5E+10	ohms
Surface resistivity	Surface resistivity	--3		>1.0E+16	ohms

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top