Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ASTM D570 | 0.060 % |
| ash content | | ASTM D482 | 0.020 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| flash point | | | 350 °C |
| flash point | | | >200 °C |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Auto-ignition | | | 410 °C |
| UpwardSurface | | | 3.0 µm |
| UpwardSurface | | | 13.0 µm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTM D638 | 1600 MPa |
| tensile strength | Ultimate | ASTM D638 | 2.84 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | <11 J/m |
| Suspended wall beam without notch impact strength | | ASTM D256 | 14 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Glass Transition Temperature | | ASTM D3418 | 89.0 °C |
| melting temperature | | | >63.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare