Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | Equilibrium | | >0.015 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | R-Scale | | 102到112 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-2 |
| UL flame retardant rating | | UL94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | | 18 % |
| tensile strength | | | 1840 MPa |
| tensile strength | | | 68.1 MPa |
| tensile strength | Yield | | 45.8 MPa |
| tensile strength | Break | | 18.1 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | | 37 J/m |
| ImpactResistance-Energy | | | 89到111 N |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | | 1E+16 ohms |
| Volume resistivity | | | 1E+15 ohms·cm |
| dielectric strength | | | 14到18 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | | 71.8 °C |
| Heat distortion temperature | | | 65.0 °C |
| Heat distortion temperature | | | 82.0 °C |
| Heat distortion temperature | | | 84.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare