PA6T ARLEN™ AE4200 MITSUI CHEM JAPAN
34
- Properties:High rigidityChemical resistance
- Usages:Automotive sectorShell
Technical Data Sheet
| Basic Performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | 23℃ | ASTM D-570 | 0.4 % |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Bending modulus | dry(moist) | ASTM D-790 | 2400(2200) Mpa |
| tensile strength | dry(moist) | ASTM D-638 | 80(70) Mpa |
| bending strength | dry(moist) | ASTM D-790 | 110(100) Mpa |
| elongation | dry(moist) | ASTM D-638 | 50(50) % |
| Impact strength of cantilever beam gap | dry(moist) | ASTM D-256 | 200(220) J/m |
| Rockwell hardness | ASTM D-785 | 65 M Scale |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature | 1.82MPa | ASTM D-648 | 135 °C |
| Melting temperature | 320 °C | ||
| UL flame retardant rating | UL 94 | HB | |
| Linear coefficient of thermal expansion | ASTM D-696 | 8.0 | |
| Glass transition temperature (Tg) | 125 °C |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | 2mmt | ASTM D-955 | 0.9 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | dry | ASTM D-257 | 10 Ω.cm |
| Dielectric strength | dry | ASTM D-149 | 23 KV/mm |
| Dielectric constant | 10 | ASTM D-150 | 3.3 |
| Dissipation factor | 10 | ASTM D-150 | 0.018 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.