PBT Ranger PBT PBT-403-M-G20 HF
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ASTMD570 | 0.070 % | |
| Shrinkage rate | ASTMD955 | 0.40到0.80 % | |
| density | ASTMD792 | 1.50 g/cm³ | |
| ASTMD792 | 1.50 g/cm³ | ||
| Shrinkage rate | ASTMD955 | 0.40到0.80 % | |
| Water absorption rate | ASTMD570 | 0.070 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL94 | V-0 | |
| UL94 | V-0 | ||
| UL94 | V-0 | ||
| UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ASTMD790 | 7600 MPa | |
| tensile strength | Yield | ASTMD638 | 90.0 MPa |
| bending strength | ASTMD790 | 140 MPa | |
| tensile strength | Yield | ASTMD638 | 90.0 MPa |
| Flexural modulus | ASTMD790 | 7600 MPa | |
| bending strength | ASTMD790 | 140 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD256 | 50 kJ/m² | ||
| Impact strength of cantilever beam gap | ASTMD256 | 7.0 kJ/m² | |
| ASTMD256 | 7.0 kJ/m² | ||
| ASTMD256 | 50 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric constant | ASTMD150 | 3.70 | |
| Dissipation Factor | ASTMD150 | 2E-03 | |
| Volume resistivity | ASTMD257 | 2E+16 ohms·cm | |
| dielectric strength | ASTMD149 | 24 kV/mm | |
| Volume resistivity | ASTMD257 | 2E+16 ohms·cm | |
| dielectric strength | ASTMD149 | 24 kV/mm | |
| dielectric constant | ASTMD150 | 3.70 | |
| Dissipation Factor | ASTMD150 | 2E-03 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top