POM WR701LO KOLON KOREA

Form：Granules | Grade：Injection grade

Properties:

UV resistanceLow to no odor

Typical Applications:

Automotive sectorApplication in the automotive field

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive sector \| Application in the automotive field
Properties:	UV resistance \| Low to no odor

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.8mm	UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength	23°C	ASTM D790	97.0	Mpa
bending strength	bending strength	23°C	ISO 178	78.0	Mpa
tensile strength	23°C	ASTM D638	65.0	Mpa
tensile strength	tensile strength	Yield,23°C	ISO 527-2	60.0	Mpa
elongation	Break,23°C	ASTM D638	45	%
Tensile strain	Break,23°C	ISO 527-2	30	%
Bending modulus	23°C	ASTM D790	2700	Mpa
Bending modulus	Bending modulus	23°C	ISO 178	2600	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ASTM D648A	158	°C
	Hot deformation temperature	1.8MPa,Unannealed	ASTM D648A	110	°C
	Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	94.0	°C
Vicat softening temperature		ASTM D1525	162	°C
Melting temperature		ISO 11357-3	166	°C
Melting temperature	Melting temperature		ASTM D1525	166	°C
Linear coefficient of thermal expansion	MD	ASTM D696	1.3E-04	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	190°C/2.16kg	ASTM D1238	27	g/10min
melt mass-flow rate	melt mass-flow rate	190°C/2.16kg	ISO 1133	10	g/10min
Shrinkage rate	MD	ASTM D955	2.0	%
Shrinkage rate	Shrinkage rate		ISO 294-4	2.0	%
Water absorption rate	23°C,24hr	ISO 62	0.22	%
Water absorption rate	Water absorption rate	Equilibrium,23°C,60%RH	ASTM D570	0.22	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength		ASTM D149	19	KV/mm
Dielectric strength	Dielectric strength		IEC 60243-1	19	KV/mm
Volume resistivity		IEC 60093	1E+14	ohms·cm
Volume resistivity	Volume resistivity		ASTM D257	1E+11	ohms·cm
Surface resistivity		IEC 60093	1E+16	ohms
Surface resistivity	Surface resistivity		ASTM D257	1E+13	ohms
Dissipation factor	1MHz	ASTM D150	6E-03
Dielectric constant		ASTM D150	3.70
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	M-Scale	ASTM D785	80
Rockwell hardness	Rockwell hardness	M-Scale	ISO 2039-2	80

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top