ABS SERG1 BK DAICEL JAPAN

Form：Granules | Grade：Enhanced level

Properties:

Flame retardantenhanceGlass fiber reinforcedEnhanced level10% short glass fiber reiEnhanced level10% short glass fiber rei

Typical Applications:

Decorative componentsShellHousehold goodsSuitable for exterior decorative materialsCar chargerInjection molded products for telephone racks and

Supplier(0)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Decorative components \| Shell \| Household goods \| Suitable for exterior decorative materials \| Car charger \| Injection molded products for telephone racks and
Properties:	Flame retardant \| enhance \| Glass fiber reinforced \| Enhanced level \| 10% short glass fiber rei \| Enhanced level \| 10% short glass fiber rei

Certificates

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate		ISO 62	0.3	%
density		ISO 1183	1.30
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ISO 527	75	Mpa
bending strength		ISO 178	110	Mpa
Bending modulus		ISO 178	4700	Mpa
Charpy Notched Impact Strength	23℃	ISO 179/1eA	8	KJ/m
Charpy Notched Impact Strength	Charpy Notched Impact Strength	-30℃	ISO 179/1eA	5	KJ/m
Impact strength of cantilever beam gap	23℃,6.4mm	ASTM D-256	80	J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-30℃,6.4mm	ASTM D-256	40	J/m
Rockwell hardness		ISO 2039	R114
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.80MPa,12.7mm	ISO 75/A	86	°C
Hot deformation temperature	Hot deformation temperature	1.82MPa,12.7mm	ASTM D-648	94	°C
Vicat softening temperature	50N,50℃/h	ISO 306/B50	91	°C
Vicat softening temperature	Vicat softening temperature	9.8N,50℃/h	ASTM D-1525	100	°C
Linear coefficient of thermal expansion	Flow	ISO 11359	5	×10
Combustibility		UL 94	V-0
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate		ASTM D-955	0.2-0.5	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Arc resistance	3.0mm	ASTM D-495	10	sec
Arc resistance	Arc resistance	3.0mm	ASTM D-495	PLC_7
Dielectric strength	1.5mm	ASTM D-149	34	MV/m

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top