ABS 720FS
0
- Properties:Characteristicshigh lubricationwear resistancehigh glossgood flow
- Usages:Sliding componentshousehold appliancesautomotive interior and exterior decorationsetc
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.05 g/cm | |
| melt mass-flow rate | ASTM D-1238 | 3.0 g/10min | |
| Shrinkage rate | ASTM D-955 | 0.5～0.7 % | |
| melt mass-flow rate | ASTM D-1238 | 30 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D-785 | 105 R | |
| elongation at break | ASTM D-638 | 35 % | |
| Impact strength of cantilever beam gap | ASTM D-256 | 24 kg.cm/cm | |
| bending strength | ASTM D-790 | 700 kg/cm | |
| Flexural modulus | ASTM D-790 | 23000 kg/cm | |
| tensile strength | ASTM D-638 | 500 kg/cm |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| coefficient of friction | 与普通ABS对磨 | 0.14 | |
| wear resistance | 0.018 mm/h |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D-648 | 90 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top